Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2009 >> CX-7 Touring, 2.3 L, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Request Switch Removal/Installation [Advanced Keyless Entry And Start System] >> Driver-side/passenger-side

Request Switch Removal/Installation [Advanced Keyless Entry And Start System]: Driver-side/passenger-side

  1. Disconnect the negative battery cable.
  2. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION ).
  3. Remove the front outer handle. (See FRONT OUTER HANDLE REMOVAL/INSTALLATION .)
  4. Remove the screws A, then remove the handle seat and plate.
  5. Remove screw B, then remove the request switch.
    Fig 1: Identifying Request Switch (Driver Side/Passenger Side)
    G04861171Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals