Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2009 >> CX-7 Touring, 2.3 L, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Keyless Receiver Removal/Installation

Keyless Receiver Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION ).
  3. Disconnect the keyless receiver connector.
    4. Fig 1: Identifying Keyless Receiver & Connector
    G04861163Courtesy of MAZDA MOTORS CORP.
  4. Remove the bolt, then remove the keyless receiver.
  5. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals