Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2009 >> 5 Touring, 2.3 L >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Gear And Linkage Assembly >> Stopper Assembly Note

Stopper Assembly Note

  1. Assemble the stopper.
  2. Inspect airtightness.
    1. Connect the SST  to the power cylinder section of the gear housing
    2. Apply 53.3 kPa {400 mmHg, 15.8 inHg}  vacuum with a vacuum pump and verify that it is held for 30 s. 
      • If the vacuum is not held, replace the oil seal.
        Fig 1: Connecting SST To Power Cylinder Section Of Gear Housing
        G05543288Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals