Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2009 >> 5 Touring, 2.3 L >> Repair and Diagnosis >> External Pages >> Different car >> Section 596 (Glass/Windows/Mirrors) >> Power Window Motor Inspection

Power Window Motor Inspection

WARNING: This page is about a different car, the 2008 Mazda 5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply battery positive voltage and connect the ground to the power window motor terminals, and then inspect the power window motor operation.
    • If the power window motor does not operate as indicated in the table, replace it.
    CAUTION:
    • If the power window motor temperature is high, the motor may not rotate due to the motor internal bimetal function. Leave it untouched for about 3 min to cool it down, then reinspect.
      Fig 1: Power Window Motor - Circuit Diagram
      G05545671Courtesy of MAZDA MOTORS CORP.
    CONNECTOR TERMINAL REFERENCE

    Operation Terminal
    E F
    Open B+ Ground
    Close Ground B+
scientia non olet · About Mike's Workshop Manuals