Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2009 >> 3 Mazdaspeed, 2.3 L >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Front Abs Wheel-Speed Sensor Inspection >> Clearance Inspection

Clearance Inspection

  1. Inspect the clearance between the front ABS wheel-speed sensor and the ABS sensor rotor.
    • If there is any malfunction, verify improper installation and replace if necessary.

    Clearance 2.1 mm {0.082 in} or less 

    Fig 1: Inspecting Clearance Between Front ABS Wheel-Speed Sensor & Sensor Rotor
    G04955726Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals