Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2008 >> CX-7 Touring, 2.3 L, AWD >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic (Engine Control System) - (5 Of 5) >> DTC P2229[L3 With TC] >> Notes

DTC P2229[L3 With TC]: Notes

DTC P2229[L3 WITH TC] DETECTION CONDITION AND POSSIBLE CAUSES

DTC P2229 BARO sensor circuit high input
DETECTION CONDITION 
  • PCM monitors the input voltage from the BARO sensor. If the input voltage at the PCM is above 4.45 V  , the PCM determines that the BARO sensor circuit has a malfunction.

Diagnostic support note 
  • This is a continuous monitor (CCM).
  • MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
  • FREEZE FRAME DATA is available.
  • DTCs are stored in the PCM memory.
POSSIBLE CAUSE 
  • BARO sensor malfunction
  • PCM malfunction
scientia non olet · About Mike's Workshop Manuals