Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2008 >> 6 s Touring, 4D Hatchback, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 626 (Engine Control System) >> Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Removal/Installation >> Notes

Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Removal/Installation: Notes

WARNING: This page is about a different car, the 2008 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the MAF/IAT sensor connector.
  2. Remove in the order indicated in  3.
  3. Install in the reverse order of removal.
    Fig 1: MAF/IAT Sensor With Torque Specifications
    G04563012Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals