Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2008 >> 5 Touring, 2.3 L >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (L3) >> Heated Oxygen Sensor (Ho2S) Removal/Installation [L3] >> Wiring Harness Bracket Installation Note

Wiring Harness Bracket Installation Note

NOTE:
  • There might be no pin. If there is no pin, lock the wiring harness bracket against rotation and tighten the nut.
    Fig 1: Identifying Wiring Harness Bracket
    G04955277Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals