Continuity Inspection

Remove the CPP switch.
Verify that the continuity between CPP switch terminals A and B is as indicated in the table.
- If there is no malfunction, perform the "Circuit Open/Short Inspection".
- If there is any malfunction, replace the CPP switch.
  
  Fig 1: Inspecting Clutch Pedal Position Switch
  Courtesy of MAZDA MOTORS CORP.

MEASURED CONDITION AND CONTINUITY REFERENCE

Measurement condition	Clutch pedal position	Continuity
Push the rod.	Clutch pedal depressed	Continuity detected
Except above	Clutch pedal released	No continuity