Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> CX-9 Touring, 3.5 C, AWD >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Gear And Linkage Assembly >> Holder Assembly Note

Holder Assembly Note

  1. Assemble the holder to the gear housing using the SST  .
  2. Connect the SSTs  to the power cylinder section of the gear housing.
    Fig 1: Assembling Holder To Gear Housing
    G04970488Courtesy of MAZDA MOTORS CORP.
  3. Apply 53.3 kPa {400 mmHg, 15.7 inHg}  vacuum with a vacuum pump and verify that it is held for at least 30 seconds  .
  4. If the vacuum is not held, replace the oil seal.
    Fig 2: Applying Vacuum With Vacuum Pump
    G04970489Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals