DTC P0040, P0041: Notes
DTC P0040, P0041 (MZI-3.5) DETECTION CONDITION AND POSSIBLE CAUSES
| DTC P0040 |
P0040: Front HO2S (LH/RH) signals swapped |
| DTC P0041 |
P0041: Rear HO2S (LH/RH) signals swapped |
| DETECTION CONDITION |
- P0040 indicates that during KOER testing, the front HO2S signal(s) response for a fuel shift to the correct engine bank was not indicated.
- P0041 indicates that during KOER testing, the rear HO2S signal(s) response for a fuel shift to the correct engine bank was not indicated.
|
| POSSIBLE CAUSE |
- Crossed HO2S harness connectors.
- Crossed wiring at HO2S harness connectors.
- Crossed wiring at PCM harness connector.
|