Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> CX-9 Touring, 3.5 C, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Request Switch Removal/Installation [Advanced Keyless System] >> Liftgate

Request Switch Removal/Installation [Advanced Keyless System]: Liftgate

  1. Disconnect the negative battery cable.
  2. Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
  3. Remove the liftgate side trim. (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
  4. Remove the liftgate lower trim. (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
  5. Remove the rear finisher. (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
  6. Press the tabs and remove the request switch.
  7. Install in the reverse order of removal.
    Fig 1: Identifying Request Switch And Rear Finisher (Liftgate)
    G04971326Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals