Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> CX-9 Touring, 3.5 C, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Inner Handle Removal/Installation >> Front

Inner Handle Removal/Installation: Front

  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Disconnect the door lock switch connector.
  5. Detach the cables from the inner handle and door lock knob.
  6. Install in the reverse order of removal.
    Fig 1: Identifying Inner Handle, Cables And Connector
    G04971250Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals