DTC P0481: Notes
DTC P0481[L3 WITH TC] DETECTION CONDITION AND POSSIBLE CAUSES
| DTC P0481 |
Fan control circuit problem |
| DETECTION CONDITION |
- The PCM monitors the input voltage from the fan control module NO. 2. If the voltage remains low or high, the PCM determines that the fan control circuit has a malfunction.
Diagnostic support note
- This is a continuous monitor (Other).
- The MIL does not illuminate.
- FREEZE FRAME DATA is not available.
- The DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- Fan control module NO. 2 malfunction
- Connector or terminal malfunction
- Short to the power supply in the wiring harness between fan control module NO. 2 terminal 2B and PCM terminal 1R
- Short to ground in the wiring harness between fan control module NO. 2 terminal 2B and PCM terminal 1R
- Open circuit in the wiring harness between fan control module NO. 2 terminal 2B and PCM terminal 1R
- PCM malfunction
|
Courtesy of MAZDA MOTORS CORP.
|