Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> CX-7 Touring, AWD >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System L3 With TC) - (1 Of 4) >> On-Board Diagnostic Test >> Freeze Frame PID Data Access Procedure

Freeze Frame PID Data Access Procedure

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (notebook PC)
      1. Select the "Toolbox" tab.
      2. Select "Self Test".
      3. Select "Module".
      4. Select "PCM".
    • When using the PDS (pocket PC)
      1. Select "Module Tests".
      2. Select "PCM".
      3. Select "Self Test".
        Fig 1: Identifying DLC-2 Connector
        G04859342Courtesy of MAZDA MOTORS CORP.
  3. Then, select the "Retrieve CMDTCs" and perform procedures according to directions on the M-MDS screen.
  4. Retrieve the freeze frame PID data according to the directions on the M-MDS screen.
scientia non olet · About Mike's Workshop Manuals