Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> CX-7 Touring, AWD >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System L3 With TC) - (1 Of 4) >> After Repair Procedure

After Repair Procedure

  1. Connect the M-MDS to the DLC-2.
  2. Cycle the ignition switch from the off to the ON position.
  3. Any retrieved DTCs.
  4. Clear all diagnostic data using the M-MDS.
    Fig 1: Identifying DLC-2 Connector
    G04859349Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals