Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 439 (On-Board Diagnostic (Engine Control System 13BMSP]) >> On-Board Diagnostic Test >> PID/DATA Monitor and Record Procedure

PID/DATA Monitor and Record Procedure

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver compartment.
  3. Access and monitor PIDs using the WDS or equivalent.
    Fig 1: Identifying DLC-2 Connector
    G03701648Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals