Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> B3000 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Crankshaft Position (CKP) Sensor Removal / Installation - 3.0L >> Removal and Installation

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. See LIFTING .
  2. Disconnect the negative battery cable. See BATTERY DISCONNECT .
    Fig 1: Disconnecting Crankshaft Position (CKP) Sensor Electrical Connector
    G04930185Courtesy of MAZDA MOTORS CORP.
  3. Disconnect the crankshaft position (CKP) sensor electrical connector.
    Fig 2: Crankshaft Position (CKP) Sensor Bolt With Torque Specification
    G04930186Courtesy of MAZDA MOTORS CORP.
  4. Remove the bolts and the CKP sensor.
  5. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals