Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Charging System (L3 With TC]) >> Generator Disassembly/Assembly [L3 With TC] >> Pulley Disassembly/Assembly Note

Pulley Disassembly/Assembly Note

WARNING: This page is about a different variant/trim than selected.
  1. Disassemble/assemble the pulley using the SST  .

    Tightening torque 

    60-85 N.m {6.1-8.7 kgf.m, 45-62 ft.lbf} 

    Fig 1: Generator Pulley
    G04325049Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals