Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Gear And Linkage Assembly >> Seal Ring Assembly Note

Seal Ring Assembly Note

  1. Install a new seal ring to the valve part of the pinion shaft using the SST  .
  2. After installing it, seat it properly using the SST  .
  3. Install the snap ring.
    Fig 1: Installing Seal Ring Using SST
    G04326564Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals