Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 628 (Engine Control System (L3 With TC)) >> Clutch Pedal Position (CPP) Switch Inspection >> Circuit Open/Short Inspection >> Notes

Circuit Open/Short Inspection: Notes

WARNING: This page is about a different car, the 2007 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Clutch Pedal Position Switch Connector Terminals
G04955225Courtesy of MAZDA MOTORS CORP.
  1. Disconnect the PCM connector.
  2. Disconnect the CPP switch connector.
  3. Inspect the following wiring harnesses for an open or short circuit. (Continuity inspection)
scientia non olet · About Mike's Workshop Manuals