Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (L3 With TC) >> Heated Oxygen Sensor (Ho2S) Inspection >> Rear HO2S Heater Resistance Inspection

Rear HO2S Heater Resistance Inspection

  1. Disconnect the rear HO2S connector.
  2. Measure the rear HO2S resistance between terminals C and D.
    • If not within the specification, replace the HO2S.

    Rear HO2S heater resistance 

    2-50 ohms 

    Fig 1: Identifying Fuse HO2S Connector Terminals
    G04325278Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals