Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> All Wheel Drive (AWD) >> AWD Control Module Removal/Installation

AWD Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the lower panel.
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
    Fig 1: AWD Control Module & Torque Specification
    G04325761Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals