No. 4 Changing the Method for Registering Additional Keys: Procedure
- Using any key, turn the ignition switch to the ON position. (Either a valid or an unregistered key can be used).NOTE:
- When using an unregistered key, although the security light flashes and DTC 15 is displayed, this does not indicate an improper procedure. Continue to perform the procedure as indicated.
- Connect the M-MDS or equivalent to the DLC-2.
- Select "Body/Security/PATS function" from the M-MDS or equivalent screen menu.
- Perform security access as indicated on the M-MDS or equivalent screen. (See NO. 6 SECURITY ACCESS PROCEDURE ).
- Select either "Customer Spare Key Programming Enable" or "Customer Spare Key Programming Disable" from the M-MDS or equivalent screen menu. Depending on the selected menu, the additional key registration method is as shown below:ADDITIONAL KEY REGISTRATION METHOD
Setting Additional key registration method Procedure using two valid keys Procedure using the M-MDS or equivalent Customer spare key programming enable x x Customer spare key programming disable - x x: Procedure is possible
-: Procedure is not possible - After verifying that the PATS function menu is displayed again on the M-MDS or equivalent screen, select "Exit" to complete the M-MDS or equivalent function.
- After Step 6, wait 10 s or more and then turn the ignition switch to the LOCK position.