Circuit Open/Short Inspection
WARNING: This page is about a different variant/trim than selected.
- Disconnect the PCM connectors.
- Disconnect the APP sensor connector.
- Inspect the following wiring harnesses for an open or short circuit. (Continuity inspection)
Open circuit
- If there is no continuity in the following wiring harnesses, there is an open circuit. Repair or replace the wiring harness.
- APP sensor terminal A and PCM terminal 1AE
- APP sensor terminal B and PCM terminal 1Y
- APP sensor terminal C and PCM terminal 1AA
- APP sensor terminal D and PCM terminal body ground
- APP sensor terminal E and PCM terminal 1AL
- APP sensor terminal F and main relay terminal C
Short circuit
- If there is continuity in the following wiring harnesses, there is a short circuit. Repair or replace the wiring harness.
- APP sensor terminal A and body ground
- APP sensor terminal A and power supply
- APP sensor terminal B and body ground
- APP sensor terminal B and power supply
- APP sensor terminal C and power supply
- APP sensor terminal D and power supply
- APP sensor terminal E and body ground
- APP sensor terminal E and power supply
- APP sensor terminal F and power supply
- APP sensor terminal F and body ground