Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> 3 i, 2.0 F, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Fuel System (L3 With TC)) >> Fuel Injector Inspection >> Circuit Open/Short Inspection >> Notes

Circuit Open/Short Inspection: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the PCM connector. (See PCM REMOVAL/INSTALLATION .)
  2. Inspect the following wiring harnesses for an open or short circuit (continuity check).
    Fig 1: Identifying Fuel Injector Connector Terminals
    G04859680Courtesy of MAZDA MOTORS CORP.
    Fig 2: PCM Connector Terminal Identification
    G04859681Courtesy of MAZDA MOTORS CORP.