Manual Transaxle - Overhaul (A26MX-R)

• Manual Transaxle
  • Precaution
  • Clutch Housing And Transaxle Case Components Disassembly
    • Disassembly Components
    • Disassembly Procedure
  • Shift Component Disassembly/Assembly
    • Notes
    • Shift Lever Shaft Oil Seal Disassembly Note
    • Shift Lever Shaft Bearing Disassembly Note
    • Breather Plug Disassembly Note
    • Breather Plug Assembly Note
    • Shift Lever Shaft Bearing Assembly Note
    • Shift Lever Shaft Oil Seal Assembly Note
    • Spring Pin Assembly Note
  • Primary Shaft Components Disassembly
    • Notes
    • Rear Bearing and 6th Gear Disassembly Note
    • 3rd Gear Disassembly Note
    • 4th Gear Disassembly Note
    • Front Bearing Inner Race Disassembly Note
  • Primary Shaft Components Inspection
    • Primary Shaft and Gear Inspection
    • Bearing Inspection
  • Primary Shaft Components Assembly
    • Notes
    • Front Bearing Inner Race Assembly Note
    • 4th Gear Assembly Note
    • 3rd Gear Assembly Note
    • 6th Gear Assembly Note
    • Rear Bearing Assembly Note
    • Rear Bearing Snap Ring Assembly Note
  • Secondary Shaft (No. 1) Components Pre-Inspection
    • Notes
    • Thrust Clearance Inspection
    • Radial Clearance Inspection
  • Secondary Shaft (No. 1) Components Disassembly
    • Notes
    • Rear Bearing and 3rd Gear Disassembly Note
    • 3rd/4th Clutch Hub Component and 4th Gear Disassembly Note
    • 1st/2nd Clutch Hub Component and 1st Gear Disassembly Note
    • Front Bearing Inner Race Disassembly Note
  • Secondary Shaft (No. 1) Components Inspection
    • Synchronizer ring, Secondary Shaft (No. 1) and Gear Inspection
    • Clutch Hub Component Inspection
    • Synchronizer Ring Clearance Inspection
    • Bearing Inspection
    • Clutch Hub Sleeve and Shift Fork Inspection
  • Secondary Shaft (No. 1) Components Assembly
    • Notes
    • Front Bearing Inner Race Assembly Note
    • 1st Gear, 1st Synchronizer Ring, 1st/2nd Clutch Hub Component Assembly Note
    • 2nd Synchronizer Ring and 2nd Gear Assembly Note
    • 2nd Bearing Inner Race Snap Ring Assembly Note
    • 4th Gear, 4th Synchronizer Ring and 3rd/4th Clutch Hub Component Assembly Note
    • 3rd/4th Clutch Hub Snap Ring Assembly Note
    • 3rd Gear and 3rd Synchronizer Ring Assembly Note
    • Rear bearing Assembly Note
    • Rear Bearing Snap Ring Assembly Note
  • Secondary Shaft (No. 2) Components Pre-Inspection
    • Notes
    • Thrust Clearance Inspection
    • Radial Clearance Inspection
  • Secondary Shaft (No. 2) Components Disassembly
    • Notes
    • Rear Bearing and 6th Gear Disassembly Note
    • 5th Gear and 5th/6th Clutch Hub Disassembly Note
    • Reverse Gear and Reverse Clutch Hub Disassembly Note
    • Front Bearing Disassembly Note
  • Secondary Shaft (No. 2) Components Inspection
    • Synchronizer Ring, Secondary Shaft (No. 2) and Gear Inspection
    • Clutch Hub Component Inspection
    • Synchronizer Ring Clearance Inspection
    • Clutch Hub Sleeve and Shift Fork Inspection
  • Secondary Shaft (No. 2) Components Assembly
    • Notes
    • Reverse Synchronizer Ring and Reverse Clutch Hub Component Assembly Note
    • Reverse Clutch Hub Snap Ring Assembly Note
    • 5th Synchronizer Ring and 5th/6th Clutch Hub Component Assembly Note
    • 5th/6th Clutch Hub Snap Ring Assembly Note
    • 6th Synchronizer Ring Assembly Note
    • Rear Bearing Assembly Note
    • Rear Bearing Snap ring Assembly Note
    • Front Bearing Assembly Note
  • Reverse Idler Gear Shaft Components Inspection
    • Notes
    • Thrust and Radial Clearance Inspection
    • Reverse Idler Gear and Shaft Inspection
  • Differential Pre-Inspection
    • Backlash inspection
  • Differential Disassembly
    • Notes
    • Bearing (Ring Gear Side) Disassembly Note
    • Bearing (Ring Gear-Opposite Side) Disassembly Note
  • Differential Assembly
    • Notes
    • Ring Gear Assembly Note
    • Bearing (Ring Gear-Opposite Side) Assembly Note
    • Bearing (Ring Gear Side) Assembly Note
  • Differential Side Bearing Preload Adjustment
  • Secondary Shaft (No. 2) Bearing Preload Adjustment
  • Clutch Housing And Transaxle Case Components Assembly
    • Assembly Components
    • Assembly Procedure
• 05-50 Technical Data
  • Technical Data
    • Secondary shaft (No. 1) gear thrust clearance
    • Secondary shaft (No. 1) gear radial clearance
    • Secondary shaft (No. 2) gear thrust clearance
    • Secondary shaft (No. 2) gear radial clearance
    • Reverse idler gear thrust clearance
    • Reverse idler gear radial clearance
    • Synchronizer ring clearance
    • Clutch hub sleeve and shift fork clearance
    • Primary shaft snap ring clearance
    • Secondary shaft (No. 1) snap ring clearance
    • Secondary shaft (No. 2) snap ring clearance
    • Gear backlash
    • Bearing rotational torque
• 05-60 Service Tools
  • Service Tools