Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> 3 Mazdaspeed, 2.3 L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Fuel System (LF, L3)) >> After Service Precaution >> Fuel Leakage Inspection >> Using M-MDS

Using M-MDS

WARNING: This page is about a different variant/trim than selected.
  1. Connect the M-MDS to the DLC-2.
  2. Start the fuel pump using the "FP" simulation function.
  3. Verify that there is no fuel leakage from the pressurized parts.
    • If there is leakage, replace the fuel hoses and clips.
    • If there is damage on the seal on the fuel pipe side, replace the fuel pipe.

    Standard 

    There shall be no leakage after 5 min. 

  4. After reinstallation, repeat step  2- 3 in the fuel leakage inspection.
    Fig 1: Identifying Data Link Connector 2
    G04954792Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals