DTC P2101: Notes
DTC P2101 [L3 WITH TC] DETECTION CONDITION AND POSSIBLE CAUSE
| DTC P2101 |
Throttle actuator circuit range/performance |
| DETECTION CONDITION |
- If any of the following conditions continue for a specified period of time or more the PCM detects a malfunction in the throttle actuator.
- The voltage of the motor power supply is 4 V or less
while the motor relay is on
- There is a system error in the electrical throttle control system of the PCM
- The temperature of the electrical throttle control system in the PCM is 180°C {356°F}
Diagnostic support note
- This is a continuous monitor.
- MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA is available.
- DTCs are stored in PCM memory.
|
| POSSIBLE CAUSE |
- Drive-by-wire-relay and related circuit malfunction
- Main relay and related circuit malfunction
- Throttle position sensor No. 1 and related circuit malfunction
- Throttle position sensor No. 2 and related circuit malfunction
- PCM malfunction
|