Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2007 >> 3 Mazdaspeed, 2.3 L >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic (Engine Control System L3 With TC) - (1 Of 5) >> After Repair Procedure

After Repair Procedure

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select the "Toolbox" tab.
      2. Select "Self Test".
      3. Select "Modules".
      4. Select "PCM".
      5. Select "Retrieve CMDTCs".
    • When using the PDS (Pocket PC)
      1. Select "Module Tests".
      2. Select "PCM".
      3. Select "Self Test".
      4. Select "Retrieve CMDTCs".
        Fig 1: Identifying DLC-2 Connector
        G04954252Courtesy of MAZDA MOTORS CORP.
  3. Verify the DTC according to the directions on the M-MDS screen.
  4. Press the clear button on the DTC screen to clear the DTC.
  5. Verify that no DTCs are displayed.
scientia non olet · About Mike's Workshop Manuals