Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2006 >> MX-5 Miata Base >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Gear And Linkage Disassembly >> Holder Disassembly Note

Holder Disassembly Note

  1. Remove the crimp from the holder and cylinder ends using a hacksaw.
    Fig 1: Removing Crimp From Holder & Cylinder Ends Using Hacksaw
    G04318788Courtesy of MAZDA MOTORS CORP.
  2. Remove the holder using the SST  .
    Fig 2: Removing Holder Using SST
    G04318789Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals