Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2006 >> MX-5 Miata Base >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostic [Dynamic Stability Control System) >> On-Board Diagnosis [Dynamic Stability Control] >> Active Command Modes Procedure

Active Command Modes Procedure

  1. Connect WDS or equivalent to the vehicle DLC-2 16-pin connector.
    Fig 1: Locating DLC-2 Connector
    G04318417Courtesy of MAZDA MOTORS CORP.
  2. Turn the ignition switch to the ON position (engine off) or start the engine.
  3. Activate active command modes using WDS or equivalent.
scientia non olet · About Mike's Workshop Manuals