Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2005 >> MPV ES >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Basic System (HVAC) >> Airflow Mode Link Removal/Installation

Airflow Mode Link Removal/Installation

  1. Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
  2. Disconnect the airflow mode wire from the airflow mode link.
  3. Remove in the order indicated in the table.
    Fig 1: Removing Airflow Mode Link Components
    G03700712Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
    NOTE:
    • Apply silicone grease or all-purpose grease to each link.
  5. Adjust the airflow mode wire. (See FRONT CLIMATE CONTROL UNIT WIRE ADJUSTMENT .)
scientia non olet · About Mike's Workshop Manuals