Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2005 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 446 (Symptom Troubleshooting [Engine Control System BP, BP With TC)) >> Fuel Line Safety Procedure

Fuel Line Safety Procedure

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel-filler cap and release the pressure in the fuel tank.
  2. Disconnect the fuel pump relay located above the accelerator pedal.
  3. Start the engine.
  4. After the engine stalls, crank the engine several times.
  5. Turn the key to OFF.
  6. Install the fuel pump relay.
    Fig 1: Installing Fuel Pump Relay
    G03637635Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals