Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2005 >> MPV ES >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Conventional Brake System >> Power Brake Unit Inspection >> Power Brake Unit Function Check (Inspection Using The Testers) >> Notes

Power Brake Unit Function Check (Inspection Using The Testers): Notes

  1. Connect the SSTs  , vacuum gauge, and pedal depression force gauge as shown in the figure.
    NOTE:
    • Use commercially available gauges and pedal depression force gauge.
    • Bleed the air from the SST  at gauge A.
  2. After bleeding the air from the SST, conduct the test as described in the following steps.
    Fig 1: Connecting SSTs Vacuum Gauge And Pedal Depression Force Gauge
    G03700239Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals