Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2005 >> B4000 Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Symptom Troubleshooting [Automatic Transmission] >> Automatic Transmission Preliminary Inspection >> Check Fluid Level and Condition >> Fluid Level Check >> Adding Fluid

Adding Fluid

CAUTION:
  • The use of any other type of transmission fluid than specified could result in transmission malfunction and/or damage.

Before adding fluid be sure that the correct type is being used; see GENERAL SPECIFICATIONS .

If fluid needs to be added, add fluid in 0.25L (1/2 pint) increments through the filler tube. Do not overfill the fluid. For fluid type, see the specification chart.

scientia non olet · About Mike's Workshop Manuals