Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2005 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Generator Disassembly/Assembly >> L3 (ATX) >> Pulley disassembly/assembly note

Pulley disassembly/assembly note

  1. Disassembly/assembly the pulley using the SST. 

    Tightening torque 

    60-85 N.m {6.1-8.7 kgf.m, 45-62 ft.lbf} 

    Fig 1: Removing Pulley Using SST
    G03644064Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals