Brakes Technical Data
BRAKES TECHNICAL DATA
| Item | Specification | ||
|---|---|---|---|
| CONVENTIONAL BRAKE SYSTEM | |||
| Brake pedal | Pedal height (reference value) | (mm {in}) | 187 {7.36} |
| Pedal play | (mm {in}) | 0-3 {0-0.1} | |
| Pedal-to-floor clearance (Brake pedal when depressed at 588 N {60 kgf, 132 lbf}) | (mm {in}) | 68 {2.7} min. | |
| Power brake unit | Fluid pressure when pedal depressed at 200 N {20 kgf, 44 lbf} (kPa {kgf/cm2 , psi}) | At 0 kPa {0 mmHg, 0 inHg} | 590 {6.02, 85.6} min. |
| At 66.7 kPa {500 mmHg, 19.7 inHg} | 8,780 {89.53, 1,273} min. | ||
| Dual proportioning valve (without ABS/TCS) | Rear brake pressure when master cylinder pressure is 2,450 kPa {25 kgf/cm2 , 355 psi} (Switching point) : (kPa {kgf/cm2 , psi}) | 2,450 {25, 355} +/- 200 {2, 29} | |
| Rear brake pressure when master cylinder pressure is 5,880 kPa {60 kgf/cm2 , 853 psi} (kPa {kgf/cm2 , psi}) | 3,480 {35.5, 505} +/- 300 {3, 44} | ||
| Front disc brake | Minimum disc pad thickness | (mm {in}) | 2.0 {0.079} |
| Minimum disc plate thickness | (mm {in}) | 23 {0.91} | |
| Disc plate runout limit | (mm {in}) | 0.02 {0.0008} | |
| Rear disc brake | Minimum disc pad thickness | (mm {in}) | 2.0 {0.079} |
| Minimum disc plate thickness | (mm {in}) | 8 {0.31} | |
| Disc plate runout limit | (mm {in}) | 0.02 {0.0008} | |
| Brake fluid | Type | SAE J1703, FMVSS 116 DOT3 | |
| PARKING BRAKE SYSTEM | |||
| Parking brake lever | Lever stroke when pulled at 98 N {10 kgf, 22 lbf} | (notches) | 2-5 |