Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2004 >> Tribute ES, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting (Engine/Fuel Control) >> On-Board Diagnostic Tests - WDS >> On-Board Diagnostic Test >> Pending Trouble Code Access Procedure

Pending Trouble Code Access Procedure

  1. Perform the necessary vehicle preparation and visual inspection. Hook-up the WDS or equivalent Tester to the vehicle.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located on the left side of the center console.
    Fig 1: Locating DLC-2 16-Pin Connector
    G00987311Courtesy of MAZDA MOTORS CORP.
  3. Retrieve PENDING TROUBLE CODES  by WDS or equivalent.
scientia non olet · About Mike's Workshop Manuals