Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2004 >> MX-5 Miata Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic (Engine Control System BP, BP With TC] >> On-Board Diagnostic Test >> PID/Data Monitor & Record Procedure

PID/Data Monitor & Record Procedure

  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect WDS or equivalent to the vehicle DLC-2 16-pin connector located the left side of the center console.
    Fig 1: Locating DLC-2
    G00989173Courtesy of MAZDA MOTORS CORP.
  3. Access and monitor PIDs by WDS or equivalent.
scientia non olet · About Mike's Workshop Manuals