Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2004 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (On-Board Diagnostic (Engine Control System 13BMSP]) >> On-Board Diagnostic Test >> PID/DATA Monitor and Record Procedure

PID/DATA Monitor and Record Procedure

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver compartment.
  3. Access and monitor PIDs using the WDS or equivalent.
    Fig 1: Recording And Monitoring PID/DATA
    G01345154Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals