Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2004 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle [Service, Removal & Installation A65M-R) >> Reverse Switch Removal/Installation

Reverse Switch Removal/Installation

  1. Remove the reverse switch.
  2. Apply a light coat of silicone sealant to the screw of the reverse switch.

    Sealant 

    Three Bond product: TB1215 

    Fig 1: Locating Reverse Switch
    G01012240Courtesy of MAZDA MOTORS CORP.
  3. Install the reverse switch to the transaxle case.

    Tightening torque 

    22.5-33.3 N.m 

    (2.3-3.4 kgf.m, 16.6-24.6 ft.lb) 

scientia non olet · About Mike's Workshop Manuals