Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2004 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (On-Board Diagnostic [Engine Control System L3)) >> After Repair Procedure

After Repair Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Connect WDS or equivalent.
  2. Cycle the ignition key from OFF to ON.
  3. Record DTC if retrieved.
  4. Clear all diagnostic data by WDS or equivalent. See Figure
scientia non olet · About Mike's Workshop Manuals