Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2004 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transaxle [Shift Mechanism]) >> Interlock Cable Inspection

Interlock Cable Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch to ON position. (Engine off)
  2. Remove the clip of the selector lever base plate, then remove the interlock cable from the U groove.
    Fig 1: Inspecting Interlock Cable
    G01012155Courtesy of MAZDA MOTORS CORP.
  3. Remove the interlock cable from the selector lever.
    Fig 2: Removing Interlock Cable From Selector Lever
    G01012156Courtesy of MAZDA MOTORS CORP.
  4. Verify that the interlock cable moves freely with the brake pedal depressed.
    • If there is any malfunction, replace the interlock cable.
    Fig 3: Verifying That Interlock Cable Moves Freely
    G01012157Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals