Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2004 >> 6 i, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (On-Board Diagnostic [Engine Control System AJ)) >> After Repair Procedure

After Repair Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Connect the WDS or equivalent to the DLC-2. See Figure.
  2. Cycle the ignition key from OFF to ON.
  3. Record DTC if retrieved.
  4. Erase all diagnostic data using the WDS or equivalent.
scientia non olet · About Mike's Workshop Manuals