Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2004 >> 3 i, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transaxle [Shift Mechanism]) >> Selector Lever Component Removal/Installation >> Notes

Selector Lever Component Removal/Installation: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery cover.
  2. Disconnect the negative battery cable.
  3. Remove the battery, battery box and battery tray.
  4. Remove the air cleaner component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L3] .)
  5. Remove the console. (See CONSOLE REMOVAL/INSTALLATION .)
  6. Remove the heat insulator (front and center).
  7. Remove in the order indicated in the table.
  8. Install in the reverse order of removal.
    Fig 1: Selector Lever Component With Torque Specifications
    G00974970Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals