Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2003 >> Tribute ES, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P0453: EVAP Control System Pressure Sensor - High Input >> Detection Condition

Detection Condition

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

PCM monitors input voltage from Fuel Tank Pressure (FTP) sensor when monitoring condition is met. If PCM terminal voltage is more than 4.79 volts after engine is started, PCM determines that FTP sensor circuit has malfunction. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition in 2 consecutive drive cycles. Pending code is available if PCM detects malfunction condition during first drive cycle. Freeze Frame Data is available and DTC is stored in PCM memory.

Monitoring Condition -  Engine coolant temperature is less than 176°F (80°C).

scientia non olet · About Mike's Workshop Manuals