Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2003 >> Tribute ES, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 301 (Glass/Windows/Mirrors) >> Rear Power Window Regulator Removal/Installation

Rear Power Window Regulator Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the rear door glass. (See REAR DOOR GLASS AND GUIDE REMOVAL/INSTALLATION  .)
  3. Disconnect the rear power window regulator.
  4. Remove the bolts, then remove the rear power window regulator.

    Tightening torque 

    6.87-9.80 N.m (60.8-86.7 in.lbf) 

  5. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals