Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2003 >> Protege ES, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Control System (HVAC) >> Resistor Removal/Installation

Resistor Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the glove compartment.
  3. Remove in the order indicated in the illustration.
    Fig 1: Removing Resistor
    G01914706Courtesy of MAZDA MOTORS CORP.
    Fig 2: Resistor Removing Order Chart
    G01914705Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals