Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2003 >> Protege ES, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0340: Camshaft Position Sensor Circuit Malfunction >> Detection Condition

Detection Condition

DTC is set when there is no input from Camshaft Position (CMP) sensor while MAF reading is more than 2.2 grams/sec. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition during first drive cycle. Pending code is not available. Freeze Frame Data is available and DTC is stored in PCM memory.

scientia non olet · About Mike's Workshop Manuals